DIY Easy Fabric Garland

This post may contain affiliate links. If you click on a link and make a purchase, I may receive a small commission at no extra cost to you.

Sharing is caring!

A fabric, pennant-style garland is perfect for any season or decor. They can be layered on top one another, hang on their own, or be draped with other types of decorations. And, unlike other DIY crafting projects, the supplies needed are inexpensive and easy to find. In fact, this no-sew garland project is perfect for using those leftover fabric scraps!

fabric pennant garland with pumpkins

I was inspired to make this do-it-yourself pennant garland as a layering piece by a photo I saw on Instagram. Earlier this fall, I’d purchased a wooden pumpkin garland from Hobby Lobby. After seeing the photo, I realized how easy it would be to create the look myself.

buffalo plaid fabric

I chose a popular fabric – black and ivory buffalo check – for my pennants.

It’s ideal for Halloween, but will work with my Thanksgiving and Christmas decor, too.

Plus, it goes with almost any other pattern.

This no-sew garland will be ready in about an hour with these easy directions…

So, let’s get crafting!

How to Make a DIY No-Sew Fabric Pennant Garland

Supplies Needed:

  • Fabric, about 15″ wide by 3-4 feet or 1/4 yard – this garland is great to make with leftover fabric scraps
  • Glue gun and glue sticks OR sewing machine and thread
  • Scissors (fabric shears) or rotary cutter
  • Pins
  • Cardboard or premade template
  • Pencil
  • Ribbon, abound 1/2″ wide by 6-8 feet long
  • Bulb pins for hanging garland
  • Embellishments like extra ribbon, twine, small bells, pom-poms, etc.

Step #1: Measuring the Length of Your Garland

The first step is to calculate how long you’d like the fabric garland to be. I use a low-tech, simple method: a roll of twine to get the length.

This works great for an existing area. For instance, mine was going over my fireplace, under an existing garland. So, I strung the twine between the nails in place leaving excess on the sides.

black ribbon

When measuring, leave at least 12-15″ of excess ribbon on each side, as shown in the photo at the right.

You’ll need this excess ribbon later, when finishing it.

This project is perfect to help use up any fabric scraps you might have.

I bought a yard of fabric, and it’s enough to make about 10 of them! But, I don’t mind having the excess because I love this buffalo check. A 15″ piece by about 3′ long should work for most projects.

Step #2: Preparing the Fabric to Make Garland

Once you have your fabric selected and measured, it’s time to prep it.

I recommend ironing the garland fabric first. For a smooth, seamless look, use some fabric sizing spray on your fabric.

buffalo plaid pennant

To make your fabric more durable, my sister, Debbie, suggests using freezer paper under the fabric: Before ironing, place the shiny side of the freezer paper up against the back of the fabric. Iron it on, then peel the paper off.

Not only will it give the fabric a stiffer, smoother look, but it helps prevent fraying.

Step #3: Cutting the Pennants for your Scrap Fabric Garland

Next, create a template for your fabric pennants. You can buy templates, but I decided to make mine from some thin cardboard.

It measures 7″ wide x 15″ long. Although I used the cutting board shown below, you don’t need one. The point tip should be at the mid-point of the width. Use a ruler to help guide your markings, then cut.

how to make fabric pennants

Lay the template over your fabric, print side down. Align the tops of the fabric and template. Trace the template onto your fabric with a fabric (or regular) pencil.

Due to the nature of how the triangles align, there is only minimal leftover fabric material.

Use very sharp scissors for cutting the fabric. Or use a rotary cutter, if you have one. If you use older or dull scissors, they won’t cut your fabric smoothly. Following your tracing lines, cut the pennants.

To add a little flair to your fabric pennants, cut some or all of them with pinking shears. The lines they create are zig zag and add an element of fun.

Step #4: Putting it All Together

buffalo plaid pennant garland

As my fabric pennant garland was going to be underneath the wooden pumpkin one, I wanted the fabric pennants to lay between each pumpkin.

buffalo plaid fabric garland

If that’s your intent, too, then align each pennant on the ribbon and pin it as a guide.

If you are a seamstress and have a sewing machine at the ready, then the best method for attaching the pennants to the ribbon is sewing them.

Otherwise, use a hot or low temp glue gun. This is the no-sew method I used to make these easy pennant garland. It is fast and effective, and holds well for a decorative craft.

I even bought a new low-temp glue gun for this scrap fabric garland project! Trust me, it’s well worth the investment.

how to make a fabric garland

Lay your fabric pennants print side down. My squared cutting mat was really useful during this step. It gave me a protective surface to glue on. And, the ruler was a guide for laying out my fabric pieces.

Remember to leave 12″-15″ of ribbon free on the sides.

buffalo plaid fabric garland

If you’re sewing, then pin the fabric pieces to the ribbon. Since my garland was laying under another one, my pennants were already pinned to the ribbon (as mentioned above).

I’d definitely recommend pinning of you don’t have a ruled surface, like a quilting or cutting mat, to work on.

I let the gun heat up and applied a thin layer of glue at the top of the fabric, then placed the ribbon carefully over it. I used my finger to smooth out the ribbon.

If you are using a hot glue gun, wait a minute or two for the glue to cool a little. With the low-temp glue, I could smooth it right after gluing.

diy pennant garland for the holidays

Let the fabric scrap banner rest on a flat surface for several minutes to let the glue set.

Step #5: Applying the Finishing Touches to Your Fabric Garland

For a more polished decorative look, add some fancy and fun trim to the edges of your fabric pennants. Sewing notions like rip rac trim, lace, fringe, or braided trim can easily be added for whatever holiday season you are celebrating.

how to hang garland

To give the banner a more customized look, add more ribbon streamers to the sides.

In mine, I added some twine and sheer ribbon for a rustic farmhouse style.

There are a variety of ways to accessorize the streamers of your DIY no-sew fabric garland!

valentine's day diy fabric garland

For my Valentines garland (above), I used little bells tied to the ends of the twine.

If you opt to leave your streamers unadorned, just cut the ends to add a little visual interest. Fold the end of the ribbon in half, and cut at an angle or cut on the diagonal.

You can add pom-poms, buttons, bells, or any number of decorative items to the end of the ribbons. This is a great project for changing out the trimmings to match whatever holiday you are celebrating. With just a few adjustments it’s easy to make this a no-sew Christmas fabric garland, Thanksgiving pennant garland, and more!

Hanging Your No-Sew Fabric Pennant Garland

Use bulb pins or small rings to hang the garland. You can find them in the knitting or embroidery supplies of your local crafts store.

I tied the ribbon streamers to the bulb pin and then pinned it through the ribbon. Then hang.

And you’re finished!

This fabric garland is such an easy and fun craft project to make.

how to make a pennant garland DIY with scrap fabric

What a gorgeous decor addition this garland is on my cabinet!

Whether it’s cooking or crafting, make something special today!

For more stylish living inspiration, follow me on Instagram and Facebook

Looking for more decor and style? Check out these fun and inspiring blog posts:

Leave a Comment

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.